DIY Auxiliary Light Wiring Diagram - Battery, Switch & Two Lights (Ford Bronco)

This is a simple hand-drawn (computer-sketched) wiring diagram uploaded to illustrate how to wire two auxiliary lights to a battery through a switch. The drawing shows a battery (red box) connected by a blue wire to a switch. The switch has its own ground labeled 'Switch ground'. From the switch, a black wire runs down to a 3-way connector; a green callout explains: 'There is a 3way connector here that connects the two light with the wire that goes to the swich' (sic). From that connector, a blue wire branches to two lights (drawn as rectangles), and each light has its own ground, labeled 'Light grounds' with green leader lines. The diagram contains no wire gauge specifications, fuse ratings, relay, wire colors (beyond the drawing colors), part numbers, or vehicle-specific information. A reader can learn the basic circuit topology: battery positive to switch, switch output to a 3-way splice feeding two lights in parallel, with separate chassis grounds for the switch and each light. It was uploaded to a 1992 Ford Bronco gallery, presumably documenting the owner's auxiliary light installation, but nothing in the drawing itself identifies a vehicle or year.