What wire colors does the JBL amp use for the subwoofer in the 2010 Genesis Coupe?

The woofer speaker (connector F40) uses wire P on pin 3 (+), B/O on pin 4 (-), G on pin 1 (+), and B on pin 2 (-), coming from AMP pins 12, 25, 13, and 26 (F03-B).

Which connector is the rear right speaker on the JBL system?

The rear speaker RH uses connector F37: pin 2 with an O (orange) wire for RR(+) from AMP pin 10 (F03-B), and pin 1 with a G wire for RR(-) to AMP pin 23.

How is the JBL amplifier grounded?

Three black (B) wires from AMP pins 14, 15, and 16 (Ground, connector F03-B) run to ground point GF08 (PHOTO 20).

What connectors serve the driver door and tweeter speakers?

The driver door speaker uses connector D08 and the driver tweeter uses D09, both on W and Br wires that pass through connector FD11 (pins 13 and 12) to AMP FL(+) pin 8 and FL(-) pin 16.

How is the center speaker wired?

The center speaker (connector M09, PHOTO 65) connects via connector MF31 (pins 13/12, PHOTO 72) with a Gr wire from AMP pin 6 (Center speaker +) and a B wire to AMP pin 14 (F03-A, Center speaker -).

Home/ Registry/ Hyundai/ Genesis/ “Coupe”/ Photo supermotors.net/registry/media/1077007

2010 Hyundai Genesis Coupe JBL Amp Speaker Wiring Diagram (Audio SD961-4)

2010 Genesis Coupe ETM Audio wiring diagram SD961-4 with JBL amp and speakers

‹ ›

Audio system wiring diagram from a 2010 Genesis Coupe ETM showing the JBL amplifier, door speakers, tweeters, woofer, and center speaker circuits.

AI caption January 2016 · Photo 664 of 981

This document is page 195 of 215 from the 2010 Hyundai Genesis Coupe Electrical Troubleshooting Manual (ETM), page SD961-4, titled "Audio (4)." It shows the JBL amplifier speaker output wiring diagram. The diagram maps all speaker circuits from the JBL AMP (connectors F03-A and F03-B, PHOTO 90) to each speaker: rear right speaker (connector F37, wires O/G), rear left speaker (F36, wires R/L), driver door speaker (D08) and driver tweeter (D09) on W/Br wires through door pass-through connector FD11, passenger door speaker (D18) and passenger tweeter (D19) on B/Y wires through connector FD21, the subwoofer (connector F40, wires P, B/O, G, B on AMP pins 12/25/13/26), and the center speaker (connector M09 via MF31, wires Gr/B on AMP pins 6/14). Amplifier ground pins 14, 15, and 16 tie to ground point GF08 via black wires. Each speaker includes a photo reference number for connector location. A reader can identify AMP pin numbers, wire colors, connector IDs, and speaker polarity for diagnosing or modifying the factory JBL audio system.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What wire colors does the JBL amp use for the subwoofer in the 2010 Genesis Coupe?: The woofer speaker (connector F40) uses wire P on pin 3 (+), B/O on pin 4 (-), G on pin 1 (+), and B on pin 2 (-), coming from AMP pins 12, 25, 13, and 26 (F03-B).
Which connector is the rear right speaker on the JBL system?: The rear speaker RH uses connector F37: pin 2 with an O (orange) wire for RR(+) from AMP pin 10 (F03-B), and pin 1 with a G wire for RR(-) to AMP pin 23.
How is the JBL amplifier grounded?: Three black (B) wires from AMP pins 14, 15, and 16 (Ground, connector F03-B) run to ground point GF08 (PHOTO 20).
What connectors serve the driver door and tweeter speakers?: The driver door speaker uses connector D08 and the driver tweeter uses D09, both on W and Br wires that pass through connector FD11 (pins 13 and 12) to AMP FL(+) pin 8 and FL(-) pin 16.
How is the center speaker wired?: The center speaker (connector M09, PHOTO 65) connects via connector MF31 (pins 13/12, PHOTO 72) with a Gr wire from AMP pin 6 (Center speaker +) and a B wire to AMP pin 14 (F03-A, Center speaker -).

Comments

No comments yet.

More from this build

Cooling-fan wiring diagram for Theta 2.0 TCI engine with fan relays, fuses and coolant sensor

Cooling System wiring diagram for Lambda II 3.8 GDI engine with fan relays, fuses and sensor

Service photo labeling instrument-panel wiring connectors I/P-A to I/P-K and Z01 diode

Wiring diagram legend of wire color codes, harness and connector identification

Service manual figure Photo.59 with callouts to PDM modules and rear parking assist buzzer

Service manual figure labeling BCM connectors, in-car temp sensor and TPMS module

Close-up of Hyundai Genesis coupe engine bay showing intake manifold, sensors, hoses, and a yellow wire.

Starting system wiring diagram with battery, start relays, solenoid and motor, ignition switch and color-coded wires

All 1054 photos of this build

More Hyundai Genesiss

2010 Hyundai Genesis51 photos

The Hyundai Genesis registry