What wire color feeds the map lamps and cargo lamp on a 1996 Bronco?

Circuit 54, colored LG/Y (light green/yellow), runs from splice S214 through S251 to the map lamps (via C300M/C300F and C305) and the inside cargo lamp (via C315M/C315F, C318M/C318F and C308).

What fuse powers the remote/keyless entry module and main light switch feed shown here?

A 15A fuse in position 4 of the fuse panel supplies circuit 195 T/W (tan/white), which goes to the remote/keyless entry module at C240 pin 13 and the main light switch at C273 pin B2.

Which connector and pin feed the compass/outside temperature module?

Circuit 54 LG/Y feeds the compass/outside temperature module through connector C914 at pin 6; this applies with the overhead console only (see page 102-1).

Where does the vanity mirror lamp power come from?

With vanity mirrors, 54 LG/Y goes through splice S300 to the left vanity mirror lamp (C911M/C911F) and right vanity mirror lamp (C912M/C912F), both detailed on page 89-2.

Which pin of the power mirror switch receives power?

Circuit 54 LG/Y goes through C214M/C214F and C550F/C550M to pin 1 of the power mirror switch (pages 124-1, 124-2); this routing applies without remote/keyless entry.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ “Buckin Bronco”/ Photo supermotors.net/registry/media/1110760

1996 Ford Bronco Power Distribution Wiring Diagram 13-13 - Interior Lamps

96 Bronco power distribution wiring diagram for interior lamps and mirror switches

‹ ›

Reference · 1992-1996 BroncoAll 411 wiring diagrams

1996 Ford Bronco Power Distribution 13-16 Wiring Diagram - Horn Relay & DRL

1996 Ford Bronco Power Distribution Wiring Diagram - Headlight Switch (13-15)

1996 Ford Bronco Power Distribution Wiring Diagram 13-14 - ACC/RUN Fuse Circuits

1996 Ford Bronco Power Distribution Wiring Diagram 13-13 - Interior Lamps

1996 Ford Bronco Power Distribution Wiring Diagram - Circuit 54 LG/Y, Page 13-12

1996 Ford Bronco Power Distribution Wiring Diagram 13-11 - Fuse 17 Circuit 640

1996 Ford Bronco Power Distribution Wiring Diagram 13-10 - Fuses 1, 7, 18

1996 Ford Bronco Power Distribution Wiring Diagram 13-9 - Circuit 171 BK/W

1996 Ford Bronco C202F 76-Pin Connector Pinout - EVTM Page 150-4

1994 Ford Bronco/F-Series C103 & C108 Connector Pinouts - EVTM Page 150-2

1994 Ford Bronco/F-Series EVTM 150-2: C103 & C108 In-Line Connector Pinouts

Ford Bronco VSS to PCM Wiring Diagram - Rear Axle Sensor, PSOM, ABS Circuit

411wiring diagrams1992-1996 Ford Bronco More reference

Exploded parts

Ford F150/F250/F350 4x4 & Bronco Truck Jacking Instructions Label E7TA-17A083-EA

Service procedure

Spec plate

1996 Ford Bronco Owner's Manual - Checking & Adding Engine Coolant

Manual page

1993 Ford V8 Serpentine Belt Routing Diagram - Pulley Layout (Q2601-E)

Schematic

Smittybilt XRC Gen 3 Winch Box - 9.5K/12K Recovery Winch Features & Callouts

Brochure

Blueprint

1995 Ford Bronco 5.8L Emissions/VECI Label - Vacuum Hose Routing Diagram

Vacuum routing

Ford Bronco/F-Series Fuse 18 (10A) - Speedometer, Air Bag, Shift Control

Fuse chart

Rod Bolt Stretch Monitoring Chart - 8-Rod V8 Connecting Rod Bolt Record Sheet

Torque spec

Power distribution wiring diagram for the 1996 Ford Bronco showing interior lamp and mirror-switch circuits.

Part of 1992-1996 Ford Bronco Wiring Diagrams

AI caption July 2017 · Photo 265 of 378

This document is page 13-13 ("Power Distribution") of the 1996 Ford Bronco electrical/vacuum troubleshooting manual (EVTM). It diagrams the battery-power distribution branch for interior lighting and convenience circuits. Circuit 54 LG/Y (light green/yellow) originates from splice S214 (page 13-12), passes through connectors C200M/C200F to splice S251, and fans out to: map lamps (via C300M/C300F, C305), inside cargo lamp (via C315M/C315F, C318M/C318F, C308), power mirror switch (via C214M/C214F, C550F/C550M pin 1), left courtesy lamp switch (C263M/C263F), left and right vanity mirror lamps (via S300, C911M/C911F, C912M/C912F, with vanity mirrors only), and the compass/outside temperature module (C914 pin 6, with overhead console only). Separately, circuit 195 T/W (tan/white) runs from a 15A fuse in position 4 of the fuse panel (page 13-12/13-15) to the remote/keyless entry module (C240 pin 13, keyless-entry vehicles only) and to the main light switch (C273 pin B2). Callouts distinguish routings with vs. without remote/keyless entry. Page references guide the reader to related diagrams for each component.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What wire color feeds the map lamps and cargo lamp on a 1996 Bronco?: Circuit 54, colored LG/Y (light green/yellow), runs from splice S214 through S251 to the map lamps (via C300M/C300F and C305) and the inside cargo lamp (via C315M/C315F, C318M/C318F and C308).
What fuse powers the remote/keyless entry module and main light switch feed shown here?: A 15A fuse in position 4 of the fuse panel supplies circuit 195 T/W (tan/white), which goes to the remote/keyless entry module at C240 pin 13 and the main light switch at C273 pin B2.
Which connector and pin feed the compass/outside temperature module?: Circuit 54 LG/Y feeds the compass/outside temperature module through connector C914 at pin 6; this applies with the overhead console only (see page 102-1).
Where does the vanity mirror lamp power come from?: With vanity mirrors, 54 LG/Y goes through splice S300 to the left vanity mirror lamp (C911M/C911F) and right vanity mirror lamp (C912M/C912F), both detailed on page 89-2.
Which pin of the power mirror switch receives power?: Circuit 54 LG/Y goes through C214M/C214F and C550F/C550M to pin 1 of the power mirror switch (pages 124-1, 124-2); this routing applies without remote/keyless entry.