2010 Hyundai Genesis Coupe Tail, Parking & License Lamps Wiring Diagram SD928-1
Tail, parking and license lamps wiring diagram from the 2010 Genesis Coupe electrical troubleshooting manual.
This is a screenshot of page 154 of 215 from the 2010 Hyundai Genesis Coupe Electrical Troubleshooting Manual (ETM), viewed in Macromedia FlashPaper. It shows wiring diagram SD928-1, 'Tail, Parking & License Lamps (1)' (reference E5A3D09F). The circuit begins at a 15A TAIL fuse in the E/R junction box LH (hot at all times), which feeds the Tail Relay. The relay output passes through TAIL (LH) 7.5A and TAIL (RH) 10A fuses in the I/P junction box (fuse details on SD120-6). The relay is controlled by the BCM (Tail Relay Control / Tail Switch, connector M02-C pin 16), which receives input from the multi-function light switch (HEAD/PARK/AUTO/OFF, connector M48-L). Loads shown include rear combination lamp tail lamps LH (connector F57) and RH (F58), side marker and tail lamps in head lamp LH (E95) and RH (E96), and the license lamps, which use connector F31 (without button start) or F75 (with button start), with FF01 for button-start variants. Grounds shown are GM03, GF04, GF07 and GE03, with ground distribution references SD130-2 and SD130-4. Wire colors include B, Br/B, W, L, Gr, O, and Y.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What fuses protect the tail lamp circuit on the 2010 Genesis Coupe?
- A 15A TAIL fuse in the E/R junction box LH (hot at all times), plus a 7.5A TAIL (LH) fuse and a 10A TAIL (RH) fuse in the I/P junction box; fuse details are on SD120-6.
- What controls the tail relay on the 2010 Genesis Coupe?
- The BCM (Tail Relay Control / Tail Switch, connector M02-C pin 16), which receives input from the multi-function light switch with HEAD, PARK, AUTO and OFF positions via connector M48-L.
- Which connectors serve the rear combination tail lamps?
- Connector F57 for the rear combination lamp LH and connector F58 for the rear combination lamp RH.
- How does the license lamp wiring differ with button start?
- Without button start the license lamps use connector F31; with button start they use connector F75, and connector FF01 is also used in the button-start circuit.
- What ground points are used in this tail lamp circuit?
- GM03, GF04, GF07 and GE03, with ground distribution shown on SD130-2 and SD130-4 via joint connectors JM01, JEFEM and JELIN.
Comments
More from this build
No comments yet.