2010 Hyundai Genesis Coupe SD120-1 Passenger Compartment Fuse Details Diagram
Passenger compartment fuse detail diagram showing smart junction box fuses feeding modules, audio, navigation and amplifier.
This document is page SD120-1, "Passenger Compartment Fuse Details (1)," a wiring diagram showing how four fuses inside the Smart Junction Box distribute power to passenger-compartment circuits. Power comes from a source that is "HOT IN ACC OR ON." The fuses shown are MODULE6 (10A), MODULE1 (7.5A), C/LIGHTER (15A), and POWER OUTLET (15A). The diagram traces each fused output through numbered Smart Junction Box pins (14, 13, 16, 3, 15 I/P-C, 9 I/P-G, 10 I/P-A, 6 I/P-B), intermediate connectors (MR11, FD11, MM11), and wire color/gauge codes (e.g., 0.3L, 0.3B/O, 0.3O, 0.3P, 0.3Y, 0.3W/B, 0.3W, 0.85R) to end components: BCM, PDM, Smart Key Control Module (with button start variants), Map Lamp in the overhead console, Audio or A/V & Navigation Head Unit (with/without navigation options), MTS Module, Multi Monitor, Front Monitor, JBL and HACO amplifiers, Power Outside Mirror Switch, Front Power Outlet, and Console Power Outlet. Terminal connector IDs and pin numbers (e.g., M02-A pin 13, M51-B pin 4, F04-A pin 6) are given for each component. A reader can use this to trace fuse-to-component power feeds and identify wire colors for diagnosis.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What fuses are shown in the Passenger Compartment Fuse Details (1) diagram SD120-1?
- Four Smart Junction Box fuses: MODULE6 10A, MODULE1 7.5A, C/LIGHTER 15A, and POWER OUTLET 15A.
- Which fuse powers the JBL and HACO amplifiers?
- The circuit from Smart Junction Box pin 9 I/P-G feeds the AMP (JBL) at connector F04-A pin 6 and the AMP (HACO) at connector F03-A pin 7 via 0.3P wires; the same branch also feeds the power outside mirror switch (D03 pin 1) on a 0.3W wire.
- When are these circuits powered?
- The feed is labeled 'HOT IN ACC OR ON,' meaning the circuits are powered when the ignition is in ACC or ON.
- What wire color feeds the front and console power outlets?
- Both use 0.85R wires: the Front Power Outlet at connector M04 pin 1 (from pin 10 I/P-A) and the Console Power Outlet at connector M82 pin 1 (from pin 6 I/P-B via connector MM11 pin 11).
- How does the audio wiring differ with and without navigation?
- From Smart Junction Box pin 3, without navigation a 0.3P wire goes to the AUDIO unit at M03-B pin 11; with navigation a 0.3P wire goes to the A/V & Navigation Head Unit at M70-B pin 11, and a 0.3P branch also feeds the MTS Module at M60 pin 20.
Comments
More from this build
No comments yet.