1996 Ford Bronco SAS Hand Sketch - 7" Rod End & 3-1/2" Offset Dimensions

This is a hand-drawn, dimensioned sketch (a rough blueprint/template) made in marker on a piece of corrugated cardboard, uploaded to the gallery of a 1996 Ford Bronco under the filename SAS 075.jpg. The drawing depicts a linkage arm or rod, likely a steering linkage or track-bar style component associated with a solid axle swap (SAS) project, consisting of a threaded shank (shown with cross-hatching to indicate threads) that transitions into a rounded eye or joint end. Two dimensions are recorded: 7 inches measured from the "End of Threads" to the centerline of the eye, and 3 1/2 inches measured vertically from the eye centerline down to a reference baseline. An actual flat steel washer is laid on the cardboard near the eye, apparently as a physical size reference for the hole or joint bore. There are no part numbers, vehicle model statements, dates, or other text on the document. A reader can learn the intended layout geometry (7" thread-end-to-eye distance and 3 1/2" vertical offset) the fabricator planned for this custom part.