What ground splice do the instrument cluster and warning chime module use in a 1994 Bronco/F-Series?

Splice S202. The Instrument Cluster (C250), Heater Control Illumination (C298), Ignition Switch (C269), Shift Lock Actuator (C236), Warning Chime Module (C280), Electronic Shift Control Switch (C267), Fog Lamps Switch (C206), and Diesel Warning Lamps Display (C264) all ground through S202.

What wire color is circuit 398 on the instrument cluster ground?

Circuit 398 is BK/Y (black/yellow), shown from instrument cluster pin 7, noted for Lightning & Bronco.

Which connector grounds the fog lamps switch?

C206, shown with a 'Lightning' callout; the fog lamps switch circuit is on page 86-1.

Where does splice S202 connect beyond this page?

It connects via point 'F' from splice S203, continued on page 10-13.

Which components on this page apply only to specific configurations?

The Diesel Warning Lamps Display is 'Diesel Only,' the Electronic Shift Control Switch applies 'With Electronic Shift Control,' the Fog Lamps Switch is marked 'Lightning,' and instrument cluster circuit 398 BK/Y is marked 'Lightning & Bronco.'

Home/ Registry/ Ford/ Bronco/ 1992-1996/ 1996 Ford Bronco/ Photo supermotors.net/registry/media/1090777

1994 Ford Bronco/F-Series EVTM Page 10-15 Grounds - S202 Ground Splice Diagram

1994 Bronco/F-Series ground wiring diagram page 10-15, ignition and shift circuits

‹ ›

Reference · 1992-1996 BroncoAll 411 wiring diagrams

1994 Ford Bronco/F-Series Ground Wiring Diagram - EVTM Page 10-5 Grounds

1994 Ford Bronco/F-Series EVTM Pg 10-9 Grounds - Radio, PCM & Air Bag G200

1994 Ford Bronco EVTM Grounds 10-16: 4WABS & Speedometer Ground Wiring Diagram

1994 Ford Bronco/F-Series EVTM Page 10-15 Grounds - S202 Ground Splice Diagram

1994 Ford Bronco/F-Series EVTM Grounds 10-14 - S205 Ground Splice Diagram

1994 Ford Bronco/F-Series EVTM Grounds Diagram Pg 10-13 - S203 Ground Splice

1994 Ford Bronco/F-Series EVTM Grounds 10-12 - Door Switch & Marker Lamp Wiring

1994 Ford Bronco/F-Series EVTM Grounds Diagram Pg 10-11 - G201 S200 Wiring

1994 Ford Bronco/F-Series Instrument Cluster PSOM Wiring Diagram - EVTM 60-7

1994 Ford Bronco/F-Series PSOM C252 Connector Pinout - Speedometer Wiring

1994 Ford Bronco 4WABS ABS Wiring Diagram - EVTM Page 42-4

1994 Ford Bronco Vehicle Speed Sensor Wiring Diagram - EVTM Page 64-2 PSOM VSS

411wiring diagrams1992-1996 Ford Bronco More reference

Exploded parts

Ford EEC-IV Output State Check & Cylinder Balance Test - Code Reader Procedure

Service procedure

Ford E4OD Solenoid Body Pin ID, Resistance Chart & PCM Pins - ATSG Fig. 16

Spec plate

Manual page

Ford 5.0L / 5.8L HO Firing Order Diagram - Spark Plug Wire Routing & Timing

Schematic

Brochure

1996 Ford Bronco/F-150 Overhead Console Compass Temp Display Connector Pinout

Fuse chart

Blueprint

1995 Ford Bronco 5.8L Emissions/VECI Label - Vacuum Hose Routing Diagram

Vacuum routing

Rod Bolt Stretch Monitoring Chart - 8-Rod V8 Connecting Rod Bolt Record Sheet

Torque spec

Ford ground wiring diagram for instrument cluster, ignition switch, shift lock actuator and fog lamp switch circuits.

Part of 1992-1996 Ford Bronco Wiring Diagrams

AI caption June 2016 · Photo 272 of 409

This is page 10-15, "Grounds," from the 1994 Ford Bronco/F-Series Electrical and Vacuum Troubleshooting Manual (EVTM), applicable to ALL models. The diagram shows how multiple interior electrical components share a common ground splice, S202. Components tied to this ground include the Diesel Warning Lamps Display (connector C264, pin 5, diesel only), the Instrument Cluster (C250, pins 3, 7, and 10, with circuit 398 BK/Y, black/yellow, noted for Lightning and Bronco), Heater Control Illumination (C298), Ignition Switch ground pin (C269), Shift Lock Actuator (C236), Warning Chime Module (C280, pin 5), Electronic Shift Control Switch (C267, pin 2, only with electronic shift control), and the Fog Lamps Switch (C206, Lightning only). Each component references the EVTM page where its full circuit is shown (e.g., Instrument Cluster page 60-4, Ignition Switch pages 13-3/13-9, Warning Chime Module page 66-1, Fog Lamps Switch page 86-1). The splice S202 connects to splice S203, continued on page 10-13. A reader can use this page to trace ground circuits for these dash-area components when diagnosing grounding faults.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What ground splice do the instrument cluster and warning chime module use in a 1994 Bronco/F-Series?: Splice S202. The Instrument Cluster (C250), Heater Control Illumination (C298), Ignition Switch (C269), Shift Lock Actuator (C236), Warning Chime Module (C280), Electronic Shift Control Switch (C267), Fog Lamps Switch (C206), and Diesel Warning Lamps Display (C264) all ground through S202.
What wire color is circuit 398 on the instrument cluster ground?: Circuit 398 is BK/Y (black/yellow), shown from instrument cluster pin 7, noted for Lightning & Bronco.
Which connector grounds the fog lamps switch?: C206, shown with a 'Lightning' callout; the fog lamps switch circuit is on page 86-1.
Where does splice S202 connect beyond this page?: It connects via point 'F' from splice S203, continued on page 10-13.
Which components on this page apply only to specific configurations?: The Diesel Warning Lamps Display is 'Diesel Only,' the Electronic Shift Control Switch applies 'With Electronic Shift Control,' the Fog Lamps Switch is marked 'Lightning,' and instrument cluster circuit 398 BK/Y is marked 'Lightning & Bronco.'