What wire color is the courtesy lamp power feed circuit 53?

Circuit 53 is BK/LB (black with light blue), and it carries 12V when the courtesy lamp output is active (marked **).

What is the ground circuit for the courtesy lamps and where does it terminate?

The ground return is circuit 57 (BK, black), which routes through splices such as S500, S205, S200, and S309 to ground G201. See Grounds pages 10-11, 10-12, and 10-13.

Does this diagram apply to vehicles with remote keyless entry?

Yes — the diagram is labeled 'ALL WITH REMOTE KEYLESS ENTRY' for the 1994 Bronco/F-Series.

Which connectors serve the door courtesy lamps?

C700 (left rear door), C504 (left front door), and C800 (right rear door). Each shows 12V (**) on the feed side and 0V on the ground side.

Where does the outside cargo/high mount stop lamp circuit connect?

Through connector C910 (component view 151-19 A5); its ground is 57 BK to C300, and a 569 DG wire goes to the Turn/Stop Hazard Lamps on page 90-2.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ 1996 Ford Bronco/ Photo supermotors.net/registry/media/1133897

1994 Ford Bronco/F-Series Courtesy Lamps Wiring Diagram - EVTM Page 89-8

1994 Bronco/F-Series courtesy lamps wiring diagram page 89-8 with dome and cargo lamps

‹ ›

Wiring diagram for 1994 Ford Bronco/F-Series courtesy, dome, and cargo lamps with color-coded circuits.

AI caption May 2018 · Photo 363 of 413

This is page 89-8 of the 1994 Ford Bronco/F-Series Electrical and Vacuum Troubleshooting Manual (EVTM), showing the Courtesy Lamps wiring diagram for all vehicles equipped with Remote Keyless Entry. The diagram traces circuit 53 (BK/LB, black/light blue) power feed — labeled 12V when courtesy lamp output is active (**) — from splice S299 (page 89-7) through connectors C299, C200, C304, C214, C300, C303, C910, C906, C700, C504, and C800 to the left rear door courtesy lamp, left front door courtesy lamp, dome lamp, outside cargo/high-mount stop lamps, and right rear door courtesy lamp. Ground returns are circuit 57 (BK, black) through splices S500, S205, S200, and S309 to ground G201, with references to grounds pages 10-11, 10-12, and 10-13. Callouts distinguish Bronco-only, F-Series-only, and Crew Cab-only wiring branches. The overhead console connection (C914, page 102-1), turn/stop hazard lamps (circuit 569 DG, page 90-2), and component-location grid references (e.g., 151-17 B1, 151-19 A1, 151-22 E1) are also shown. A reader can identify wire colors, circuit numbers, connector IDs, splice points, and where to find component views for the interior courtesy lighting system.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What wire color is the courtesy lamp power feed circuit 53?: Circuit 53 is BK/LB (black with light blue), and it carries 12V when the courtesy lamp output is active (marked **).
What is the ground circuit for the courtesy lamps and where does it terminate?: The ground return is circuit 57 (BK, black), which routes through splices such as S500, S205, S200, and S309 to ground G201. See Grounds pages 10-11, 10-12, and 10-13.
Does this diagram apply to vehicles with remote keyless entry?: Yes — the diagram is labeled 'ALL WITH REMOTE KEYLESS ENTRY' for the 1994 Bronco/F-Series.
Which connectors serve the door courtesy lamps?: C700 (left rear door), C504 (left front door), and C800 (right rear door). Each shows 12V (**) on the feed side and 0V on the ground side.
Where does the outside cargo/high mount stop lamp circuit connect?: Through connector C910 (component view 151-19 A5); its ground is 57 BK to C300, and a 569 DG wire goes to the Turn/Stop Hazard Lamps on page 90-2.