What circuit and wire color feeds the courtesy lamp switches on a 1994 Bronco with remote keyless entry?

Circuit 54 LG/Y (light green/yellow) feeds the right rear courtesy lamp switch (C322), left rear courtesy lamp switch (C321), and the Remote Keyless Entry Module.

Where does the Remote Keyless Entry Module get power on this diagram?

Power enters on pin 16 through connector C241 on circuit 54 LG/Y, supplied from splice S212 (see page 89-6) via circuit 706 GY.

What wire goes from the keyless entry module to the anti-theft system?

Circuit 627 BK/O (black/orange) runs from pin 8 at connector C241 to the Anti-Theft Controller Module, shown on page 112-1.

Which circuit powers the right front door courtesy lamp?

Circuit 53 BK/LB runs from the keyless entry module through splice S299 and connector C228 to C606 at the right front door courtesy lamp; ground returns on circuit 57 BK via splices S602 and S203.

Where is the battery saver output on the Remote Keyless Entry Module?

The battery saver output is on pins 9 and 10 of the module, detailed on page 89-10; the battery saver input is pin 4 at connector C242.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ 1996 Ford Bronco/ Photo supermotors.net/registry/media/1133898

1994 Ford Bronco/F-Series Courtesy Lamps Wiring Diagram - Keyless Entry (89-7)

1994 Bronco/F-Series courtesy lamps wiring diagram page 89-7 with color-coded circuits

‹ ›

Wiring diagram for 1994 Ford Bronco/F-Series courtesy lamps with remote keyless entry, color-coded circuits and connectors.

AI caption May 2018 · Photo 364 of 413

This document is page 89-7 from the 1994 Ford Bronco/F-Series Electrical and Vacuum Troubleshooting Manual (EVTM), covering the Courtesy Lamps circuit for vehicles equipped with Remote Keyless Entry. The wiring diagram shows power arriving from splice S212 (page 89-6) on circuit 706 GY, and circuit 54 LG/Y feeding the right rear courtesy lamp switch (connector C322, component location 151-22 A8), the left rear courtesy lamp switch (connector C321, location 151-22 D1), and the Remote Keyless Entry Module (location 151-14 B9) at connectors C241 (pin 16 power), C242 (pin 4 battery saver input), and C240 (courtesy lamp switch input). Module outputs include circuit 627 BK/O to the Anti-Theft Controller Module (page 112-1), battery saver output on pins 9 and 10 (page 89-10), and circuit 53 BK/LB through splice S299 to C200 (page 89-8) and through C228 to the right front door courtesy lamp (C606, location 151-19 A6). Ground returns on circuit 57 BK through splices S602 and S203. Circuit 24 DB/O runs from the rear switches to connector C300 (page 89-6). A reader can trace wire colors, circuit numbers, connector IDs, splice points, and cross-referenced pages for the courtesy lamp/keyless entry system.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What circuit and wire color feeds the courtesy lamp switches on a 1994 Bronco with remote keyless entry?: Circuit 54 LG/Y (light green/yellow) feeds the right rear courtesy lamp switch (C322), left rear courtesy lamp switch (C321), and the Remote Keyless Entry Module.
Where does the Remote Keyless Entry Module get power on this diagram?: Power enters on pin 16 through connector C241 on circuit 54 LG/Y, supplied from splice S212 (see page 89-6) via circuit 706 GY.
What wire goes from the keyless entry module to the anti-theft system?: Circuit 627 BK/O (black/orange) runs from pin 8 at connector C241 to the Anti-Theft Controller Module, shown on page 112-1.
Which circuit powers the right front door courtesy lamp?: Circuit 53 BK/LB runs from the keyless entry module through splice S299 and connector C228 to C606 at the right front door courtesy lamp; ground returns on circuit 57 BK via splices S602 and S203.
Where is the battery saver output on the Remote Keyless Entry Module?: The battery saver output is on pins 9 and 10 of the module, detailed on page 89-10; the battery saver input is pin 4 at connector C242.