Ford Bronco Transfer Case Skid Plate Blueprint - 1x1 .25 Wall Tubing Layout

This document is a simple homemade blueprint/sketch for a transfer case skid plate, uploaded to a 1995 Ford Bronco gallery. It contains two views. The 'Rear Profile' view shows a horizontal plate (drawn as a black bar) with an irregular dark shape below its center, apparently representing the transfer case or crossmember area as seen from behind the vehicle. The 'Top Profile' view shows the skid plate as a large rectangle with two horizontal strips running across it — the upper strip is labeled '1x1 .25wall', indicating 1-inch by 1-inch square tubing with 0.25-inch wall thickness used as reinforcement/mounting rails — and a centered box labeled 'Tcase' marking the transfer case location relative to the plate. No dimensions for overall plate size, material thickness of the plate itself, bolt locations, part numbers, or vehicle-specific applicability information are given. A reader can learn the general layout concept: a flat plate spanning under the transfer case, supported by two runs of 1x1 .25-wall square tubing, one ahead of and one behind the transfer case position.