Ford Bronco DIY Bracket Blueprint - .375" Plate with .75" Hole, Dimensions

This document is a simple CAD-style dimensioned blueprint (drawing) of a flat steel plate part, uploaded to a 1994 Ford Bronco gallery. The drawing specifies the part is to be cut from.375" (3/8-inch) plate. Overall dimensions are 6 units wide by 5 units tall (units not labeled, presumably inches). The shape features a 2-unit-wide vertical tab at the upper left that stands 4 units tall on the left edge, with a 0.75"-diameter hole located in the tab. A horizontal step is dimensioned 2 units down from the top of the right portion, and a long diagonal edge runs from that step down to the bottom-right corner. A 1-unit dimension is shown at the lower-left of the base. The drawing contains no part numbers, vehicle identification, torque specs, or installation instructions, it is purely a fabrication template. A reader can use this drawing to lay out and cut the plate (likely a bracket or mount) from 3/8" material and drill the 3/4" hole in the indicated position. The filename indicates it was exported from a CAD program ("Drawing2-Model").