1995 Probe manual transaxle assembly procedure pages with shift…

, Install a new shift shaft l 7 21 shift lever shaft (70355). lTubrloate the eIth me shaft lever seal and the shlft lever s a specified transmission fIUId. side of the , Install the shift lever shaft through the 4 22 flywheel housing into the shift fork selector lever FORK 3232ch LEVER 71 41 7. Insert the oil pan magnet (7L027) into the flywheel housing. THIRD/F0 GEAR smPJ FORK 7230 R 23, Insert a new roll pin through the fly into the shift lever shaft. SHIFT FORK SELECTOR LEVER 7F116 ' lFFERENTl AL [2026 C1 0556-E shaft lever seal on the 28. NOTE: Replace the shift reverse lever shaft and lubricate the new Shl. ith specified transmission flUid. shaft lever seal w install the reverse lever assembly and partially install the reverse lever shaft. 29. Insert the ball and spring into the reverse lever shaft. 30. Compress the spring new roll pin into the re 31. NOTE: Lightly coat the reverse with sealant. install the reverse lev plug. SHIFT LEVER SHAFT 70355 C10569-B 24. Position the fifth / reverse shift . gate on the flywheel housmg and slide the shift control shaft (7241) into the shift gate. 25. Align the shift gate bo ' gate bolt. It holes and install the shlft 26. Place the reverse idler ' . gear and bushin (7141) and the reverse idler 9 flywheel housing. gear shaft (7140) into the with a punch and insert a verse lever shaft. lever shaft plug er shaft plug and stake the 1995 Probe August, 1994