What is connector C119 on a 1994 Ford Bronco?

C119 is the 4WABS (four-wheel anti-lock brake system) Control Module connector, shown here with a 40-cavity connector face diagram and full pinout table.

Which pins are ground on the 1994 Bronco 4WABS module connector?

Pins 1 and 14 are both grounds, using circuit 530 with a light green/yellow (LG/Y) wire.

What pin and wire color is the ignition feed to the 4WABS module?

Pin 20, circuit 601, light blue/pink (LB/PK) is the ignition feed.

Which pins carry the rear wheel speed sensor signals?

Pin 21 is Rear Sensor (Low), circuit 519 (LG/BK), and pin 22 is Rear Sensor (High), circuit 523 (R/PK).

What wire is the 4WABS failure warning lamp circuit?

Pin 18, circuit 603, dark green (DG) wire is the 4WABS Failure Warning Lamp circuit.

Home/ Registry/ Ford/ Bronco/ 1992-1996/ 1996 Ford Bronco/ Photo supermotors.net/registry/media/1120582

1994 Ford Bronco 4WABS ABS Module C119 Connector Pinout - EVTM Pg 42-7

1994 Ford Bronco/F-Series 4WABS control module C119 connector pinout chart, page 42-7

‹ ›

Anti-lock brake (4WABS) control module connector C119 pinout for 1994 Bronco/F-Series: lists all 40 pins with circuit numbers, wire colors and functions plus connector reference list.

AI caption September 2017 · Photo 326 of 413

This is page 42-7 from the 1994 Ford Bronco/F-Series Electrical and Vacuum Troubleshooting Manual (EVTM), covering the Anti-Lock Brakes (ABS) section for the Bronco. It shows the connector face view of C119, the 4WABS (four-wheel anti-lock brake system) Control Module connector, with 40 pin cavities illustrated in three rows. A full pinout table lists each used pin number, its circuit number and wire color code, and its circuit function. Key circuits include grounds (pins 1 and 14, circuit 530 LG/Y), ignition feed (pin 20, 601 LB/PK), the 4WABS failure warning lamp (pin 18, 603 DG), front and rear wheel sensor high/low pairs, dump and iso valves for each front wheel and the rear, G-switch inputs, pump motor relay coil, diagnostic trigger circuit, motor speed sensor high/low, and vehicle speed output (pin 39, 491 O/LB). A Connector Reference List cross-references related connectors (C223, C250, C251, C252, C267, C269) to their EVTM cell numbers. This page is useful for diagnosing 4WABS wiring problems, identifying wire colors at the ABS module, and tracing ABS-related circuits on a 1994 Bronco.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What is connector C119 on a 1994 Ford Bronco?: C119 is the 4WABS (four-wheel anti-lock brake system) Control Module connector, shown here with a 40-cavity connector face diagram and full pinout table.
Which pins are ground on the 1994 Bronco 4WABS module connector?: Pins 1 and 14 are both grounds, using circuit 530 with a light green/yellow (LG/Y) wire.
What pin and wire color is the ignition feed to the 4WABS module?: Pin 20, circuit 601, light blue/pink (LB/PK) is the ignition feed.
Which pins carry the rear wheel speed sensor signals?: Pin 21 is Rear Sensor (Low), circuit 519 (LG/BK), and pin 22 is Rear Sensor (High), circuit 523 (R/PK).
What wire is the 4WABS failure warning lamp circuit?: Pin 18, circuit 603, dark green (DG) wire is the 4WABS Failure Warning Lamp circuit.