Homemade Loading Ramp Sketch - Unlabeled Schematic Drawing (1991 Ford Bronco Album)

This document is a simple, unlabeled line drawing (schematic) uploaded under the filename 'ramp 2.jpg' to a 1991 Ford Bronco gallery on SuperMotors.net. It depicts a long ramp or inclined beam extending from an elevated point at the upper left down to a support structure near the right. The support consists of a short vertical post standing on a horizontal ground line, with a second, shorter beam angling down from the top of the post to the ground, apparently acting as a lower ramp section or brace. A small circle with a curved arrow at the upper-left end of the long beam suggests a pivot, hinge, roller, or hook attachment. The drawing contains no text, dimensions, measurements, part numbers, or vehicle-specific information of any kind. It appears to be a conceptual sketch for a homemade loading ramp or similar structure rather than an automotive wiring diagram or fuse chart. Given the companion file 'Straw Building.jpg' in the same album, this is likely part of a personal construction/project sketch set. Readers can learn only the general geometry of the proposed ramp arrangement; no factory or vehicle-specific data can be extracted from this image.