L Door to Dash.JPG
791 hits | 35.37 KB | Posted: 8/19/04

This is a '94 EB door panel on an '82 door with a '95 vent window and a '95 mirror. The door glass ...
L Door B.JPG
1333 hits | 41.76 KB | Posted: 8/19/04

The panel is very tight against the lower A-pillar, and actually presses into the dash pad (which me...
L Door.JPG
623 hits | 37.3 KB | Posted: 8/19/04

A wider shot. The spotlight is a Unity from a cop car, the steering column is from an '83 pickup, t...
R Door to Dash.JPG
647 hits | 35.2 KB | Posted: 8/19/04

This shows the difference in the shapes of the 2 dashes. The pad sticks up because this dash was da...
Door Sw 1.jpg
778 hits | 65.14 KB | Posted: 11/30/04

There's only a slight difference in these door switches. On the early style, the connector (black p...
Door Sw 2.jpg
517 hits | 51.8 KB | Posted: 11/30/04

To reset the switch adjustment, mount the nut (gray) solidly.
Door Sw 3.jpg
501 hits | 59.33 KB | Posted: 11/30/04

Spray penetrating oil between the nut & the brass sleeve.
Door Sw 4.jpg
470 hits | 60.16 KB | Posted: 11/30/04

Gently tap on the connector to slide the brass sleeve as far out of the nut as it will go.
Door Sw 5.jpg
610 hits | 54.75 KB | Posted: 11/30/04

Now the brass sleeve (yellow) is fully exposed. After the switch is reinstalled in the vehicle, sim...
Door Details.jpg
1059 hits | 68.08 KB | Posted: 10/14/05

Door Details
Door Latch 92.jpg
1240 hits | 72.4 KB | Posted: 10/16/05

Door Latch '92-96
Door Locks.jpg
722 hits | 47.85 KB | Posted: 10/14/05

Door Locks for '92-96 2-door trucks
Door Window.jpg
637 hits | 64.24 KB | Posted: 10/14/05

Door Window Regulators
Door Windows.jpg
1000 hits | 83.32 KB | Posted: 10/14/05

Door Windows
1992 Bronco body.JPG
320 hits | 64.42 KB | Posted: 2/9/07

Body Dimensions

Check the door opening dimensions FIRST to make sure the body isn't bent.
DoorAlignment.JPG
860 hits | 67.45 KB | Posted: 2/9/07

Door Alignment basics & torque specs

For a detailed explanation, read this post:
http://fullsize...
00BitsBAD.JPG
452 hits | 35.45 KB | Posted: 2/9/07

Alignment Tools BAD

This should show a T-50 & a 13mm socket. I'll get a better one later.
02StrikeAlign.JPG
374 hits | 52.35 KB | Posted: 2/9/07

The first step is to align the strike bolt so the door is perfectly aligned with the body line when ...
01StrikeAlign.JPG
331 hits | 53.61 KB | Posted: 2/9/07

The first step is to align the strike bolt so the door is perfectly aligned with the body line when ...
03StrikeAliged.JPG
348 hits | 52.43 KB | Posted: 2/9/07

The first step is to align the strike bolt so the door is perfectly aligned with the body line when ...
04StrikeAliged.JPG
346 hits | 60.04 KB | Posted: 2/9/07

The first step is to align the strike bolt so the door is perfectly aligned with the body line when ...
door-hinge.jpg
275 hits | 64.01 KB | Posted: 2/9/07

It's possible to access the hinge bolts by merely swinging the back edge of the fender away from the...
05HingeBolts.JPG
274 hits | 77.63 KB | Posted: 2/9/07

It's possible to access the hinge bolts by merely swinging the back edge of the fender away from the...
06FrameAligned.JPG
310 hits | 45.74 KB | Posted: 2/9/07

After a LOT of trial-&-error, the door can be aligned for a decent fit to the opening
DoorSeals.JPG
316 hits | 56.36 KB | Posted: 2/9/07

Door Seal Details

Rearview Mirror
About SM | Advertising | Affiliates | Contact SM | Discounts | FAQ/Help | Legal | Services | Sponsors | Support Forums
Copyright © 1998-2007, LHB Companies LLC, DBA SuperMotors.
All rights reserved. Duplication & reproduction is strictly prohibited.
supermotors.net v4.1.3 ChangeLog

Sponsored Links:
Loans | Debt Help | MPAA | Loans | Harley-Davidson cut shipments