The 1992 model year brought the second-generation Ford Taurus, a restyle of the front-wheel-drive sedan and wagon that grew slightly in size and weight over the first generation. The standard engines carried over: the pushrod Vulcan 3.0 V6 across most sedans and wagons, with the Essex 3.8 V6 standard on the LX wagon and optional elsewhere, both paired with the four-speed AXOD-E (later AX4S) automatic. The Taurus was the best-selling car in the United States across this generation, part of a run it held from 1992 through 1996, with reported Taurus sales of 409,751 in 1992, 360,448 in 1993, 397,037 in 1994, and 366,266 in 1995. The performance Taurus SHO continued with its Yamaha-built engine. For 1993 Ford split the SHO engine into two displacements: the original 3.0 dual-overhead-cam V6 stayed with the Mazda-built MTX-IV five-speed manual, while a new 3.2 version was offered with the AX4S automatic. The 3.2 retained the 220-horsepower rating, now at 6000 rpm, and raised torque to about 215 lb-ft. The 3.0 manual SHO ran through 1995. The Mercury Sable remained the badge-engineered sibling of the second-generation Taurus.
Other Ford Taurus generations
The 1992-1995 Ford Taurus at a glance
- Generation: second-generation Ford Taurus, a restyle of the front-wheel-drive sedan and wagon
- Years: 1992 through 1995, replaced by the third-generation Taurus for 1996
- Sales: best-selling car in the United States during a run that held from 1992 through 1996
- Engines: Vulcan 3.0 OHV V6; Essex 3.8 V6; SHO Yamaha 3.0 V6 (manual) and 3.2 V6 (automatic, from 1993)
- Transmissions: four-speed AXOD-E / AX4S automatic on standard models; Mazda-built MTX-IV five-speed manual on the 3.0 SHO
- Body styles: four-door sedan and four-door wagon
- Performance variant: Taurus SHO, with the 3.0 V6 (manual) and the new 3.2 V6 (automatic) from 1993
- Sibling: the badge-engineered Mercury Sable
Ford Taurus 1992-1995 year by year
| Year | Ford Taurus changes | Engines offered |
|---|---|---|
| 1992 | Second-generation Ford Taurus arrives as a restyled, slightly larger sedan and wagon; the Taurus is the best-selling car in the United States for 1992 | Vulcan 3.0 V6; Essex 3.8 V6; SHO Yamaha 3.0 V6 (manual) |
| 1993 | The Ford Taurus SHO adds a 3.2 Yamaha V6 for automatic-equipped cars, while the 3.0 V6 continues with the manual | Vulcan 3.0 V6; Essex 3.8 V6; SHO 3.0 V6 (manual); SHO 3.2 V6 (automatic) |
| 1994 | The 1994 Ford Taurus continues as the best-selling car in the United States; SHO offered in 3.0 manual and 3.2 automatic forms | Vulcan 3.0 V6; Essex 3.8 V6; SHO 3.0 V6 (manual); SHO 3.2 V6 (automatic) |
| 1995 | Final model year of the second-generation Ford Taurus and the last year of the Yamaha V6 SHO before the V8 SHO arrives for 1996 | Vulcan 3.0 V6; Essex 3.8 V6; SHO 3.0 V6 (manual); SHO 3.2 V6 (automatic) |
What changed for the second generation
The 1992 Ford Taurus was a restyle of the first-generation car rather than an all-new platform. The sedan and wagon grew slightly in exterior size and gained weight, and the styling smoothed the original jelly-bean theme. The standard powertrain and the front-wheel-drive layout carried over from the first generation. Across this generation the Taurus held its position as the best-selling car in the United States, a streak it had begun for the 1992 model year. The Mercury Sable continued as the badge-engineered counterpart.
Engines and transmissions of the 1992-1995 Ford Taurus
The standard 1992-1995 Ford Taurus used the pushrod Vulcan 3.0 V6 on the L, GL, and LX sedans and wagons, with the Essex 3.8 V6 standard on the LX wagon and optional on other non-SHO models. Both standard engines used the four-speed AXOD-E automatic, later designated AX4S. The performance SHO used Yamaha-built dual-overhead-cam engines. From 1993 the SHO was offered in two displacements: the 3.0 V6 stayed with the Mazda-built MTX-IV five-speed manual, and a new 3.2 V6 was paired with the AX4S automatic. The 3.2 used a larger 92 mm bore, kept the 220-horsepower rating but moved its peak to 6000 rpm with a milder camshaft, and raised torque to about 215 lb-ft at 4000 rpm.
Trim levels and body styles
The 1992-1995 Ford Taurus was offered in trims that included the base L, the volume GL, the higher LX, and the performance SHO. Both the four-door sedan and the four-door wagon were available on the standard models, while the SHO was a sedan. The Mercury Sable provided a parallel sedan and wagon lineup under a separate badge.
Best-selling car in America
The Ford Taurus was the best-selling car in the United States throughout the second generation, continuing a run that had begun for the 1992 model year. Reported Taurus sales were 409,751 in 1992, 360,448 in 1993, 397,037 in 1994, and 366,266 in 1995. The Taurus held the title through 1996 before the Toyota Camry took it for 1997.
The Yamaha V6 SHO (1992-1995)
The second-generation Taurus SHO continued the Yamaha V6 performance line. For 1992 the SHO used the 3.0 dual-overhead-cam 24-valve V6 with the Mazda-built MTX-IV five-speed manual. For 1993 Ford added a 3.2 version of the Yamaha V6 specifically for SHO cars equipped with the AX4S four-speed automatic, while the 3.0 stayed with the manual. The 3.0 manual SHO ran through the 1995 model year. The 1996 third-generation SHO then replaced the Yamaha V6 with a 3.4 Yamaha V8, ending the V6 SHO era.
Frequently asked questions
What generation is the 1992-1995 Ford Taurus?
The 1992-1995 Ford Taurus is the second generation. It is a restyle of the first-generation car, slightly larger and heavier, and it remained a front-wheel-drive sedan and wagon. It was the best-selling car in the United States across these years.
What engines did the 1992-1995 Ford Taurus use?
The standard 1992-1995 Ford Taurus used the pushrod Vulcan 3.0 V6, with the Essex 3.8 V6 standard on the LX wagon and optional elsewhere. The performance SHO used a Yamaha-built 3.0 V6 with the manual, plus a 3.2 V6 for automatic cars from 1993.
What is the difference between the 3.0 and 3.2 SHO engines?
The 3.0 Yamaha SHO V6 was paired with the manual transmission, while the 3.2 V6, added for 1993, was paired with the AX4S automatic. The 3.2 used a larger bore, kept the 220-horsepower rating but at 6000 rpm with a milder camshaft, and raised torque to about 215 lb-ft.
Was the 1992-1995 Ford Taurus the best-selling car in America?
Yes. The Ford Taurus was the best-selling car in the United States across the second generation, with reported sales of 409,751 in 1992, 360,448 in 1993, 397,037 in 1994, and 366,266 in 1995.
When did the Yamaha V6 SHO end?
The Yamaha V6 SHO ended after the 1995 model year. The third-generation SHO, introduced for 1996, replaced the V6 with a 3.4 Yamaha V8, so 1995 was the last Taurus SHO with the Yamaha V6.
Sources
- Wikipedia, Ford Taurus (second generation)
- Wikipedia, Ford SHO V6 engine
- Ford-Taurus.org Taurus/Sable Encyclopedia, second-generation history
- Contemporary U.S. sales reporting for the Taurus, 1992-1995
- Manufacturer specification figures
Asked all the time
What generation is the 1992-1995 Ford Taurus?
The 1992-1995 Ford Taurus is the second generation. It is a restyle of the first-generation car, slightly larger and heavier, and it remained a front-wheel-drive sedan and wagon. It was the best-selling car in the United States across these years.
What engines did the 1992-1995 Ford Taurus use?
The standard 1992-1995 Ford Taurus used the pushrod Vulcan 3.0 V6, with the Essex 3.8 V6 standard on the LX wagon and optional elsewhere. The performance SHO used a Yamaha-built 3.0 V6 with the manual, plus a 3.2 V6 for automatic cars from 1993.
What is the difference between the 3.0 and 3.2 SHO engines?
The 3.0 Yamaha SHO V6 was paired with the manual transmission, while the 3.2 V6, added for 1993, was paired with the AX4S automatic. The 3.2 used a larger bore, kept the 220-horsepower rating but at 6000 rpm with a milder camshaft, and raised torque to about 215 lb-ft.
Was the 1992-1995 Ford Taurus the best-selling car in America?
Yes. The Ford Taurus was the best-selling car in the United States across the second generation, with reported sales of 409,751 in 1992, 360,448 in 1993, 397,037 in 1994, and 366,266 in 1995.
When did the Yamaha V6 SHO end?
The Yamaha V6 SHO ended after the 1995 model year. The third-generation SHO, introduced for 1996, replaced the V6 with a 3.4 Yamaha V8, so 1995 was the last Taurus SHO with the Yamaha V6.
Technical Reference
Member-uploaded diagrams & documents for this generation. AI-classified; community-verified where badged.
Wiring Diagrams (34)
- Ford Taurus Turn Signal Switch & Flasher Wiring Diagram - Circuits 15A702This document is a section of a Ford electrical wiring diagram (EVTM-style schematic) covering the turn signal flasher and turn signal switch circuits, headed "Engine Compartment Lamp Feed 15A702." It shows connector…
- Ford Taurus Turn Signal Switch & Flasher Wiring Diagram - Circuit 15A702This is a page from a Ford factory wiring diagram (sheet columns 114–116, drawing reference MS-F4DB-3458-AA) covering the turn signal circuit and the engine compartment lamp feed (circuit 15A702). It shows connector…
- Ford Taurus ABS Data Link Connector C170 Pinout - Wire Colors & CircuitsThis document is a simple pinout/wiring diagram for connector C170, identified as the ABS Data Link Connector. The drawing shows the connector face (an irregular, roughly diamond/hexagonal shaped connector with…
- Ford Ignition Switch Wiring Diagram - Connector 14401 Pinout, F2TB-14A464-VAThis is a page from a Ford factory wiring diagram (grid zones 111–113, row A) showing the ignition switch internal schematic and its harness connector. The switch is drawn as five ganged wafers, each stepping through…
- Automotive Relay Wiring Diagram - Pins 30, 85, 86, 87 for Lights, Horn, Fuel PumpThis document is a generic automotive relay wiring diagram showing how to wire a standard 4-terminal relay to control high-current accessories such as headlights, horns, fuel pumps, or fans. Power from the ignition…
- Ford Taurus 3.0L/3.0L SHO/3.8L Charging System Wiring Diagram (Alternator IAR)This is page 12-1 of a Ford wiring diagram covering the charging system for 3.0L SHO, 3.0L, 3.0L FFV, and 3.8L engines (labeled 'EXCEPT 3.2L SHO'), consistent with a Ford Taurus service manual. The schematic shows the…
- Ford Taurus SHO 3.2L Charging System Wiring Diagram - Alternator/RegulatorThis is page 12-2 of a Ford factory-style wiring diagram covering the charging system for the 3.2L SHO engine (Ford Taurus SHO). The diagram shows the integral alternator/regulator (IAR) circuit, including the battery…
- Ford Taurus SHO 3.0L PCM Connector C191 60-Pin Pinout Diagram - Wire ColorsThis document is a pinout diagram for connector C191, the 60-pin Powertrain Control Module (PCM) connector on a Ford 3.0L SHO engine. The drawing shows the physical face of the connector with three rows of numbered…
- 1993 Ford Taurus Illuminated Entry Module Wiring Diagram - Fuses & Wire ColorsThis wiring diagram shows the illuminated entry system circuit, filed by the uploader for a 1993 Ford Taurus. Power comes from two sources on the instrument panel (I/P) fuse panel: Fuse 8 (15A, hot at all times)…
- Ford Taurus JBL Amplifier Wiring Diagram (No CD) - Radio & Subwoofer Amp 130-8This is page 130-8 of a Ford factory wiring diagram covering the JBL premium audio system without CD player. It shows the JBL Audio System Amplifier and the separate Subwoofer Amplifier with their power, ground, input…
- Ford Taurus SHO JBL CD Player Wiring Diagram 130-10 - Radio High Level AudioThis is page 130-10 of a Ford factory wiring diagram set, titled "Radio, High Level Audio or JBL With CD Player." It shows the electrical wiring between the CD player, the radio, and the vehicle's power and ground…
- Ford Taurus SHO JBL Radio Wiring Diagram (No CD) - Speaker Wire Colors, Pg 130-9This is page 130-9 of a Ford factory wiring diagram set, titled "Radio, JBL System Without CD Player." It shows the speaker output wiring from the JBL audio system amplifier (continued from page 130-8) to the four…
- Ford Taurus SHO JBL Radio Wiring Diagram (No CD) – Amplifier & Subwoofer 130-8This document is page 130-8 of a Ford factory wiring diagram titled "Radio, JBL System Without CD Player." It shows the JBL Audio System Amplifier with its connectors C453 and C454, including pin numbers, circuit…
- Ford Taurus/SHO ABS Module Connector C1057 Pinout - Wire Colors & CircuitsThis document is a connector pinout diagram for connector C1057, the Anti-Lock Brake Control Module connector. It shows the connector face with a 55-pin layout arranged in three rows: pins 1–19 across the top, pins…
- Ford Taurus 3.0L V6 Spark Plug Wire & Coil Pack Routing Diagram (1993)This document is a simple color-coded spark plug wire routing diagram for a V6 engine with a distributorless ignition (coil pack) system. It shows two cylinder banks: the rear bank containing cylinders 1, 2, and 3, and…
- 1993 Ford Taurus PCM 60-Pin Connector Pinout - Circuit Numbers & Wire ColorsThis document is a 60-pin connector pinout identification table for an engine/powertrain control module (PCM), uploaded to the gallery of a 1993 Ford Taurus. For each pin number (1 through 60) it lists the circuit…
- Ford Taurus C191 60-Pin Connector Pinout Diagram - Circuit Numbers & Wire ColorsThis document is a pinout diagram of electrical connector C191, a 60-pin connector drawn with three rows of pins (1–20, 21–40, 41–60). Each pin position is labeled with a Ford-style circuit number and wire color…
- Ford Taurus SHO 3.2L CCRM C1019 Connector Pinout - Wire Colors & FunctionsThis document is a connector pinout reference for connector C1019, the Constant Control Relay Module (CCRM) used with the 3.2L engine. It includes a scale illustration of the 24-pin CCRM connector with each cavity…
- 1993-95 Ford Taurus SHO ATX EPC Pressure Riser Mod Wiring DiagramThis document is a wiring diagram for an "EPC Pressure Riser Mod" applicable to 1993-95 Ford Taurus SHO models with the ATX automatic transmission. The mod inserts two switched resistors into the EPC (Electronic…
- Ford DIS Ignition Connector Pin-Outs - Crank/Cam Sensor, Coil & Module WiringThis document is a wiring/connector pin-out diagram for a Ford DIS (Distributorless Ignition System). It shows the crankshaft position sensor (pins 33, 1, 2, 39, 56, 4, 3, 55 with PIP PCM, PIP S, VBAT CKP, and IGND CKP…
- Ford 3.8L DIS Ignition Wiring Diagram - EEC-IV, Coil Pack & Sensor PinoutsThis document is a Ford DIS (Distributorless Ignition System) wiring diagram for the 3.8L engine, showing the electrical interconnections between the crankshaft sensor, camshaft sensor, DIS module, ignition coil pack…
- Ford Taurus DIS Distributorless Ignition Wiring Diagram - Coil, Crank & Cam SensorsThis document is a wiring diagram for a Ford Distributorless Ignition System (DIS), uploaded to a 1993 Ford Taurus gallery. It shows power flow from the ignition switch (HOT AT ALL TIMES, with START/RUN/OFF/LOCK/ACC…
- 1993 Ford Taurus/Sable Fuse 5 (15A) Wiring Diagram - Circuit 298 P/O FeedsThis document is a factory-style wiring diagram page showing the power distribution circuit for Fuse 5, a 15A fuse in the fuse panel (referenced to page 13-5) that is hot in run. From the fuse, circuit 298 P/O…
- Ford Taurus Cornering Lamps Wiring Diagram (Page 91-1) - Multi-Function SwitchThis is page 91-1, "Cornering Lamps," from a Ford factory wiring diagram manual. It shows the cornering lamp circuit beginning at a hot-at-all-times feed through the Main Light Switch (fused at 22 A; switch positions…
- Ford Taurus SHO & Mercury Sable Cornering Lamp Wiring Diagram - Gen 2This document is a wiring diagram showing the cornering lamp circuits for the Ford Taurus SHO and Mercury Sable (second-generation, per the uploader's filename). It is split into two halves: the left half labeled SHO…
- Ford Taurus Multi-Function Switch Internal Schematic - Lamp Circuits & Wire ColorsThis document is an internal schematic of the lamp portion of a Ford multi-function switch (the steering-column switch controlling turn signals, hazard flashers, headlamp dimmer/flash-to-pass, and cornering lamps). The…
- Ford Taurus Multi-Function Switch Test Procedure - Wiper/Washer Pinout & OhmsThis document is a component testing reference for the wiper/washer portion of a Ford multi-function switch (turn signal/wiper stalk switch). The left side contains a component testing procedure table that tells a…
- Ford Taurus 3.2L SHO CCRM Internal Schematic - Constant Control Relay ModuleThis document is a schematic of the Constant Control Relay Module (CCRM) for the Ford Taurus with the 3.2L SHO SFI engine. It shows the internal layout of the CCRM, including the EEC Power Relay, Fuel Pump Relay, a…
- Ford Taurus SHO A/C Clutch & Cycling Pressure Switch Wiring Diagram (EVTM)This document is a screenshot from Ford's Technical Service Publications EVTM (Electrical and Vacuum Troubleshooting Manual) software showing the A/C clutch control wiring diagram labeled 'SHO ONLY' for Ford Taurus SHO…
- 1993 Ford Taurus Ignition Wiring Diagram Legend - SHO, EATC, Police Package CodesThis document is a partial page (marked "FRAME 21 OF 50", page/grid reference 111) from a factory-style wiring diagram set, uploaded as part of an ignition wiring reference for a 1993 Ford Taurus. The visible portion…
- Amplifier Speaker Wiring Modes - Stereo, Mono & 3-Channel Crossover DiagramThis document is a page from a car audio amplifier instruction manual explaining how to connect speaker wires in different output modes. It covers four configurations: two-channel mode (stereo, with left and right…
- Basic 12V Switched Accessory Wiring Diagram - Switch, Accessory & GroundThis is a simple hand-drawn wiring schematic showing how to wire a basic 12-volt automotive accessory with a switch. The drawing depicts an accessory (represented by a yellow bulb-like symbol) with one terminal…
- Parallel Wiring Diagram for 3rd & 5th Brake Lights - 1992 Ford TaurusThis document is a simple hand-drawn wiring diagram (filename "parallel.gif") illustrating how to wire auxiliary brake/marker lights in a parallel circuit. It depicts three light bulbs shown as yellow circles mounted…
- 3rd Brake Light & 5th Lights Series Wiring Diagram - 1992 Ford TaurusThis document is a simple hand-drawn wiring diagram (filename "series.gif") uploaded to a 1992 Ford Taurus gallery on SuperMotors.net. It illustrates how to wire a third brake light together with two additional "5th"…
Data/Spec Plates (7)
- SHO Shop Stage III Dyno Chart - Ford Taurus SHO 233 HP Dynojet 248C ResultsThis document is a chassis dynamometer test printout (dyno chart) labeled "DYNORUN.006 - 94, Stage III, +f" produced by the SHO Shop of 15608 Graham St., Huntington Beach, CA, USA, phone (714) 894-8415. The run was…
- Ford Taurus SHO Stage III Dyno Chart - 233 HP / 199.9 ft-lbs (SHO Shop Dynojet)This document is a chassis dynamometer test printout (dyno chart) produced by the SHO Shop of Huntington Beach, California, measured on a Dynojet Model 248C dynamometer. The run is labeled "DYNORUN.006 - 94, Stage III…
- 1992 Ford Taurus SHO Window Sticker - Original Monroney Label, MSRP & OptionsThis document is the original Monroney window sticker (factory price/data label) for a 1992 Ford Taurus SHO 4-door sedan, VIN 1FACP54Y0NA185048, finished in Oxford White with Opal Leather interior, equipped with the…
- Dynojet Dyno Chart 10/6/2007 - 193 HP / 192 ft-lb Runs with AEM O2 DataThis document is a Dynojet Research chassis dynamometer chart produced at Bristol Dyno / Victor Research (phone numbers (860) 282-2248 and (860) 282 7223) on October 6, 2007. It plots two back-to-back dyno runs…
- 1993 Ford Taurus Data Test Connector Pinout - Self Test, Signal Return, Fuel PumpThis document is a simple pinout diagram of an automotive self-test (data test) connector, uploaded as reference material for a 1993 Ford Taurus (second generation). The image shows a trapezoid-shaped multi-pin…
- 1993 Ford Taurus Data Link Connector Pinout - Self Test, Signal Return, Fuel PumpThis document is a simple pinout diagram of a Ford EEC self-test / data link connector, drawn as a trapezoidal gray connector body with six pin cavities: two on the top row and four on the bottom row. Three of the pins…
- 1992-95 Ford Taurus Sedan Wheel Alignment Specs - Firestone PrintoutThis document is a Firestone wheel alignment printout dated 5/6/11 at 10:35 AM for a Ford Taurus, 1992-95 Sedan. It presents before-and-after alignment measurements against factory specified ranges for both front and…
Exploded Parts (8)
- Ford Taurus Front Door Wiring Harness & Lock Exploded Parts Diagram (P-27119)This document is an exploded parts / wiring harness routing diagram for the front door and body wiring of a Ford Taurus-generation sedan. The top illustration shows the full vehicle with circled callout letters (A…
- 1990-1993 Ford Taurus SHO Door Latch & Lock Rod Exploded Parts DiagramThis is a Ford exploded parts diagram (reference P-25263, dated 8/17/1998) showing the front door lock, latch, and handle hardware assembly. The diagram presents three views: an overall door shell view with the…
- 1993 Ford Taurus Engine Mount & Subframe Exploded Diagram - Views X, Y, ZThis document is an exploded parts diagram showing engine and transaxle mounts attached to a front subframe (crossmember) assembly, as commonly used on front-wheel-drive Ford vehicles such as the Ford Taurus. The main…
- 1993 Ford Taurus Front Bumper Exploded Diagram - Part Numbers & Torque SpecThis document is an exploded parts diagram showing the front bumper assembly of a Ford Taurus (uploaded as a Gen 2 front bumper reference for a 1993 Taurus). The illustration depicts the front bumper cover, bumper…
- Ford Taurus 3.2L SHO Accessory Drive Belt Routing Diagram & Part NumbersThis document is an exploded parts / belt routing diagram for the 3.2L SHO engine's accessory drive belt system. The top portion shows an illustrated routing diagram (reference number Q3245-B) with the serpentine drive…
- 1987-95 Ford Taurus SHO TRW Rack & Pinion Steering Parts Diagram & Part NumbersThis is a page from a TRW / Federal Mogul automotive parts catalog covering Ford Taurus rack and pinion steering components, specifically for the 2/87-95 Taurus SHO. An exploded diagram at the top identifies the major…
- Ford Taurus 3.0L V6 Oil Pressure Switch Location & Torque Diagram (1993)This document is an exploded parts / location illustration showing the oil pressure switch location on a V6 engine, uploaded to a 1993 Ford Taurus gallery. The main left-hand drawing depicts the engine assembly from…
- 1993 Ford Taurus A/C Lines & Accumulator Exploded Diagram - Part NumbersThis is an exploded parts diagram of the air conditioning refrigerant line routing in the engine compartment of a Ford vehicle, uploaded to a 1993 Ford Taurus gallery. The illustration shows the engine bay from the…
Brochures & Literature (10)
- 2011 Ford Mustang Club of America Edition Coupe - Specs & Features PlacardThis document is a photographed auto show display placard describing the 2011 Ford Mustang Club of America Edition Mustang Coupe. The text explains that the 2011 Mustang Coupe is powered by a 3.7-liter Duratec 24-valve…
- 1989 Ford Thunderbird SC vs Taurus SHO Comparison Chart & Specs - Super FordThis is page 65 of the July 1989 issue of Super Ford magazine, the concluding page of a comparison test between the Ford Thunderbird SC (Super Coupe) and the Ford Taurus SHO. The left half of the page is a 'Quick…
- 1989 Ford Taurus SHO Yamaha V6 Engine Article - Hot Rod Dec 1988, Page 70This is page 70 of the December 1988 issue of Hot Rod magazine, part of an article titled "SHO of Force" covering the Ford Taurus SHO's Yamaha-built V6 engine. The page features cutaway engine illustrations and…
- 1996 Ford Taurus SHO First Drive - Motor Trend Nov 1995 V8 Specs & ReviewThis is a scan of a Motor Trend magazine "First Drive" article (page 106, November 1995 issue) by Jack Keebler covering the 1996 Ford Taurus SHO. The article describes an early drive of an "engineering sign-off"…
- 1939 On Wheels - Vintage Magazine Spread of 1939 American Car MakesThis is a photograph of a museum-style display panel reproducing a vintage two-page magazine spread titled '1939 ON WHEELS,' accompanied by the display caption 'And you thought all cars look alike Today!' The spread…
- Ford Taurus Cutaway Brochure – The Technical Side (MT-5, GL, LX Features)This is a two-page spread from a Ford Taurus sales brochure titled "Ford Taurus – The Technical Side." The centerpiece is a large, detailed cutaway (phantom/cross-section) illustration of a four-door Taurus sedan…
- 1957-59 Ford Skyliner Retractable Space Saver Luggage - Rare Factory OptionThis is a laminated single-page display sheet (car show placard style) titled "Space Saver Luggage," describing it as "the rarest option available for 1957-59 Ford Skyliner Retractable." The page consists almost…
- 1995 Ford Taurus SHO Production Numbers by Color, Trim & OptionsThis document is a Ford Performance Group production statistics sheet for the 1995 Ford Taurus SHO. It breaks down total 1995 SHO production (9,567 units) by exterior color: Moonlight Blue (832), Deep Emerald Green…
- 1995 Ford Taurus SHO Production Numbers by Color, Trim & OptionsThis document is a Ford Performance Group production statistics sheet for the 1995 Ford Taurus SHO. It presents a detailed table breaking down total 1995 SHO production (9,567 units) by exterior paint color: Blue…
- 2015 Shelby GT Mustang - Standard & Optional Features Spec SheetThis is a photograph of a display placard/banner at a car show presented at a Shelby American booth, describing the 2015 Shelby GT (based on the Ford Mustang). The sign lists the car's Standard Features and Optional…
Service Procedures (7)
- Ford AX4N/AX4S MLP Sensor (TRS) Test Procedure - C171 Pinout & Resistance ChartThis service document covers testing of the Manual Lever Position (MLP) sensor, also known as the transmission range sensor, used with Ford's AX4N/AX4S automatic transmissions at connector C171. The left portion shows…
- Ford Taurus SHO Shift Control Cable Removal & Installation - Torque SpecsThis is a screenshot of a page from Ford's Technical Service Publications electronic service manual covering removal and installation of the automatic transaxle shift control cable. A labeled exploded diagram (D5893-F)…
- Ford Taurus SHO Shift Control Cable Removal - Service Manual Steps & PartsThis document is a screenshot of a page from a Ford Technical Service Publications electronic service manual (file SPH75009.GUI) showing part of a shift control cable removal procedure for a vehicle with a transaxle…
- Ford Taurus Multi-Function Switch Test Procedure - Turn/Hazard/Dimmer ContinuityThis document contains two side-by-side "Component Testing Procedure" tables for a multi-function switch (turn signal/dimmer/hazard lever stalk switch). Each row tells the tester which circuit terminals to connect a…
- Ford Taurus Windshield Wiper Switch Test - Continuity & Resistance by PinThis service procedure document describes the Windshield Wiper Switch Test, used to diagnose problems with the turn signal/windshield wiper switch (multi-function switch) and wiper/washer switch circuits. It instructs…
- Ford Taurus AX4S Transmission EPC & Line Pressure Test Port Locations DiagramThis document is a labeled line-art illustration of an automatic transmission case, showing the locations of external pressure test taps and fittings. Four callouts identify: the line pressure tap (where a pressure…
- Ford Taurus/Sable EEC-IV Diagnostic Trouble Codes 53-99 Chart - 2.5L 3.0L 3.8LThis is page 4-21 of an emission controls service reference showing Ford EEC-IV self-test diagnostic service (trouble) code tables. Two tables list two-digit service codes from 53 through 99, each with a description of…
Blueprints (3)
- Aluminum H-Brace Fabrication Blueprint - 1993 Ford Taurus DIY Brace DrawingThis document is a CAD-style fabrication blueprint (filename hbracedwg.jpg) showing a welded aluminum H-brace assembly. The drawing depicts two horizontal square tubes (specified as .125" wall x 2" square aluminum…
- Ford Taurus Subframe Bushing Design Blueprint - Machining DimensionsThis document is a CAD blueprint (drawn on a dark background in typical drafting style) showing two machined cylindrical parts, apparently a homemade subframe bushing design. The upper part is a stepped bushing: 2.100…
- V-Engine Dual Plenum Induction System Patent Article - SH & Tell Summer 2001This document is page 13 of the Summer 2001 issue of a newsletter titled "SH & tell." It contains patent-style descriptive text (with an accompanying cross-sectional drawing labeled "Fig-2") explaining the design of a…
Manual Pages (15)
- Excess-Air Factor λ & Ignition Timing Effects on HC, NOx, CO Emissions - ManualThis manual page explains the relationship between the excess-air factor (lambda, λ) and ignition timing (αz) on engine exhaust emissions and fuel consumption. The text describes how the optimal ignition advance angle…
- Cylinder Charge in Spark-Ignition Engines – Fresh Gas, Residual Gas & EGR DiagramThis manual page explains the fundamentals of cylinder charge in a spark-ignition (gasoline) engine as part of an engine management system description. It first concludes an overview of the ignition subsystem, which…
- Inductive Ignition Systems Explained: Ignition Coil & Driver Stage FunctionThis scanned page comes from an automotive engineering reference (Bosch-style technical manual) covering spark-ignition engine ignition systems. It concludes a discussion of how mixture dilution and ignition timing…
- Bosch Gasoline Engine Management: SI Engine Torque & Primary Functions (Page 1)This is a scanned page from a Bosch gasoline-engine management reference (likely a Bosch technical handbook). It opens the chapter "Gasoline-engine management" with two sections. "Technical requirements –…
- Service text describing OBD-II diagnostic monitors: misfire, fuel system, comprehensive component, catalyst, oxygen sensor, evaporative, EGR, and drive cycles that set MIL and DTCs.
- Service manual text covering EEC-V information sensors (HO2S, CKP, CMP, IAT, TPS, MAF, VSS, EGR) and output actuators; explains how each sensor feeds voltage signals to the PCM.
- Ford Taurus EEC-V Emission & Engine Control Component Locations - OHV V6This is a scanned page from a Haynes-style repair manual chapter covering emissions and engine control systems (EEC-V) for a Ford vehicle. The top of the page shows a photograph of an OHV V6 engine bay with 15 numbered…
- Ford DIS Ignition Acronyms & Breakout Box Overlay Key - PIP, CID, SPOUT, IDMThis single-page reference document explains the acronyms and labeling conventions used on the DIS (Distributorless Ignition System) Schematic and Breakout Box Overlays for the DIS Diagnostic Harness. It defines nine…
- UPS Ground Tracking Detail Screenshot - Jan 2008 Refused Package Progress LogThis document is not an automotive reference page; it is a screenshot of a UPS 'Track Shipments' web page showing the tracking detail for a package (tracking number 1Z 609 8W9 03 4652 843 7). The package weighed 5.00…
- Ford Taurus SHO 3.0L/3.2L Engine Compartment Component Location DiagramThis document is an engine compartment component location diagram for a Ford Taurus SHO with the 24-valve DOHC engine (covering both 3.0L and 3.2L SHO variants). The illustration shows an overhead/front view of the…
- Engine Induction System Patent Text - Dual Plenum Intake & Throttle Staging (2001)This is page 16 of the Summer 2001 issue of a newsletter ("S H & Tell"), reprinting the concluding portion of a patent describing an induction system for an internal combustion engine. The text explains how staged…
- Ford Taurus SHO Dual-Plenum Intake Patent Text - SHO & Tell Summer 2001 Page 14This document is page 14 of the Summer 2001 issue of the "SHO & tell" newsletter. It reproduces a portion of a patent-style technical description of a dual-plenum engine induction (intake) system. The text explains how…
- Ford Taurus SHO Intake System Patent Article - SHO & Tell Summer 2001, Page 11This is page 11 of the Summer 2001 issue of the 'SHO & tell' newsletter, reproducing text and a drawing from a patent describing an improved induction/intake system for multi-cylinder internal combustion engines. The…
- DIY Speaker Crossover Guide - 6 dB/Octave Filter Component Chart (2/4/8 Ohm)This document is a car-audio reference page titled 'Setting the Filter Constant' and 'Component Guide,' explaining how to build simple 6 dB/octave passive speaker crossover filters. It shows three circuit diagrams with…
- 1995 Ford Taurus California Smog Check Report (VIR) - Passed 2005 InspectionThis document is a California Smog Check Vehicle Inspection Report (VIR) for a 1995 Ford Taurus, tested on 08/15/2005 at 08:20. The vehicle passed the enhanced Smog Check inspection. The report lists Smog Check…
Fuse & Relay Charts (3)
- 1993 Ford Taurus Fuse Box Diagram - Panel Layout, Flasher & Color CodesThis document is a fuse and relay panel layout diagram, uploaded to the gallery of a 1993 Ford Taurus. The diagram shows the physical arrangement of the interior fuse panel with 18 numbered fuse positions, a round Turn…
- 1993 Ford Taurus Fuse Panel Chart - Fuse Numbers & Circuit Functions (Owner's Guide)This document is a two-page spread from a Ford owner's guide (Servicing section) showing 'The fuse panel chart.' It is a troubleshooting table organized as 'If these parts do not work... Check fuse #.' Left page: fuse…
- Ford Taurus / SHO ABS Module 55-Pin Connector Pinout - Circuits & Wire ColorsThis document is a 55-pin connector pinout chart for an anti-lock brake system (ABS) module, applicable to the Ford Taurus and Taurus SHO (per the footnotes '* SHO ONLY' and '** TAURUS ONLY'). For each pin number…
Schematics (8)
- Ford Taurus SHO V6 DIS Wiring Diagram - Distributorless Ignition SchematicThis document is a wiring schematic for the Distributorless Ignition System (DIS) on the V6 Ford Taurus SHO. It shows how the Cam Position Sensor (CID signal) and Crank Position Sensor (PIP signal) connect to the DIS…
- Ford DIS Module Pin-Out - 3.0L SEFI SHO & 3.8L SEFI SC Ignition Module DiagramThis document is Figure 2 from a Ford/Motorcraft technical reference, showing the DIS (Distributorless Ignition System) module and its connector pin-out for the 3.0L SEFI SHO and 3.8L SEFI SC engines. The upper portion…
- Ford DIS Ignition Timing Diagram - PIP, CID, SPOUT & Coil Current WaveformsThis document is a timing diagram for a Ford Distributorless Ignition System (DIS), uploaded as one page of a multi-page DIS reference set. The upper portion shows waveform traces plotted against crankshaft rotation…
- Ford DIS Ignition Block Diagram - EEC-IV, Coil Pack & Sensor Wiring (V6)This document is a block diagram (schematic) of a Ford Distributorless Ignition System (DIS). It shows how the camshaft sensor and crankshaft sensor — each powered by VBAT and grounded through IGN GND — feed CID and…
- Ford OBD-I Self-Test Hookup Diagram - DLC & STI Connector Jumper Wire (Taurus)This document is a schematic-style diagram showing how to hook up for reading OBD-I diagnostic trouble codes on a Ford EEC-IV system. It illustrates the Data Link Connector (DLC) with its multiple cavities, and shows…
- V6 Engine PCV / Blow-By Gas Flow Schematic - Crankcase Ventilation DiagramThis document is a schematic diagram of a positive crankcase ventilation (PCV) / blow-by gas flow system for a V6 engine. The left portion shows a cutaway of the engine with labeled components: cylinder head cover, oil…
- Ford EEC Self-Test Diagnostic Connector Pinout - Signal Return, Fuel Pump PinsThis document is a simple pinout schematic of an EEC (Electronic Engine Control) diagnostic self-test connector, uploaded to the gallery of a 1993 Ford Taurus under the filename "eec.gif." The illustration depicts a…
- Ford EEC Self-Test Input (STI) & Data Link Connector (DLC) Diagram - TaurusThis document is a simple line-drawing schematic identifying the diagnostic connectors used for EEC (electronic engine control) self-testing, uploaded to the gallery of a 1992 Ford Taurus. The illustration shows two…
Torque Specs (3)
- Ford SHO 3.0L/3.2L V6 Engine Specs - Valve, Camshaft, Rod & Bearing ClearancesThis is a page of engine mechanical specifications for the Ford 3.0L and 3.2L SHO V6 engines, apparently scanned from a factory service manual or similar reference. The left column lists valve train specifications…
- Ford B9B1 Knock Sensor Advance Rate Table (rpm vs sec/degree) - Taurus SHOThis document is a small tabular screenshot (likely from tuning/calibration software) titled 'Knock Sensor Advance Rate.' It lists a lookup table with two columns: engine speed (rpm) and the corresponding advance rate…
- Ford B9B1 Calibration Knock Sensor Retard Rate Table (RPM vs Degrees/Event)This document is a screenshot of a calibration table titled 'Knock Sensor Retard Rate,' apparently taken from engine tuning/calibration software. The table maps engine speed (rpm) to the ignition timing retard rate…
The wall · registered 1992–1995 Tauruss
Sorted by depth of documentation. Click any vehicle to open its permanent record.